Dr Big

Full Version: Choke cable holder
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I can't find what I did with the bracket that holds the choke lever in place at the top yoke , I have a few of the older type that bolt on to the yoke with a 10 mm bolt but mine was the type that is held in place using the yokes pinch bolt , if anyone has a spare I'll buy it
I'll have a look. Is it the bracket the pull knob goes into?

Sent from my HTC Desire 610 using Tapatalk
Yep
Had a look in Bobs box of old Big cables and found these.
The two big ones are off a 43 but I`m sure the other one came off a 42.
You could use the 43 widget if you drilled and tapped a 6mm thread in the front left of your top yoke

[attachment=1825]


[attachment=1824]












Bob's ur best bet there Spen as thicko here didnt cop choke. My spares and donor bike are all sr41 where the choke is a knob on the carb rather than a cable set up, sorry man.
NO worries I think i'll make a bracket
BigBob Wrote:Had a look in Bobs box of old Big cables and found these.
The two big ones are off a 43 but I`m sure the other one came off a 42.
You could use the 43 widget if you drilled and tapped a 6mm thread in the front left of your top yoke

[ATTACHMENT NOT FOUND]


[ATTACHMENT NOT FOUND]

Yes Bob i have two of the Yoke type but i think your bottom one in the pic will do the job for me the L shaped bracket that bolts onto the side of the top yoke if you could post it i would be very happy :wave: :wave: :wave: :wave: